Home > Electrical Safety Test Equipment >

ISO11925-2 Building Material Flammability Tester PLC Control Stainless Steel Combustion

Product Categories

Electrical Safety Test Equipment [172]
Environment Test Equipment [62]
Impact Test Equipment [72]
EMC Test Equipment [27]
Lamp Cap Gauge [32]
Test Finger Probe [99]
Plug Socket Tester [61]
Appliance Couplers Testing Equipment [10]
Induction Cooker Vessels [20]
IP Testing Equipment [66]
Type C Goniophotometer [9]
Led Testing Equipment [32]
Integrating Sphere Spectrophotometer [8]
Transformer Testing Equipment [10]
Ac Dc Power Supply [10]

Pego Electronics (Yi Chun) Company Limited

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

ISO11925-2 Building Material Flammability Tester PLC Control Stainless Steel Combustion

Name: ISO119252 Building Material Flammability Tester PLC Control Stainless Steel Combustion
Brand: PEGO Group
Price: 1 USD

Brand Name : PEGO Group

Model Number : PG-BMF

Certification : Third-Lab Calibration Certificate

Place of Origin : China

MOQ : 1 set

Price : Negotiation

Payment Terms : T/T, Western Union, MoneyGram

Supply Ability : 50 sets/month

Delivery Time : 15 working days

Packaging Details : woodencase

Standard : GB/T8626, ISO11925-2

Control system : PLC+touch screen

Product name : flame tester

Application : for testing the flammability of building material

Configuration : Combustion chamber, Ignition source, specimen holder

Warranty : 12 months

Contact Now

ISO11925-2 Building Material Flammability Tester PLC Control

1. Introduction

The building material flammability tester is designed according to GB/T8626-2007 and ISO11925-2:2020 standards. In a normal combustion environment to assess the flammability of building products by direct impingement with a small flame on a vertically placed specimen.

The device is controlled by PLC and touch screen, the combustion chamber is made of stainless steel sheet with a heat-resistant glazed door, configure with gas burner and adjustment valve, specimen holder and etc., all the sizes are strictly manufactured as per the standard requirement.

2. Parameters

Control units	PLC+7 inch LCD touch screen
Combustion chamber	1). Completed designed according to ISO11925-2 figure 1 2). Material: made of stainless steel sheet with thickness 1.5mm 3). the heat-resistance glazed doors are installed on front and right-side panels 4). Outer dimension: W1000mmD400mmH810mm 5). Ventilation of the enclosure shall be free through the square box section base in the bottom of the chamber, the air vents consist of 5cm*5cm open squares (made of 1.5mm thickness stainless steel and 50cm in height) to keep the air flowing smoothly.
Ignition source	1). The burner is completed designed according to ISO11925-2 figure 2 2). The burner shall be mounted onto a horizontal plate so that it moves smoothly forwards and backwards in a horizontal plate along the centreline of the combustion chamber 3). The burner can be used vertically or be tilted at 45° with respect to the vertical axis
Fuel	Commercial propane of 95% minimum purity, the gas pressure shall be between 10kPa and 50kPa (prepare by user)
Specimen holder	1). The specimen holder is completed designed according to ISO11925-2 figure 3, and vertical installed as per figure 4 2). consisted by 2 stainless steel U-sharped frames, the frame has a thickness of 5±1mm,the two halves of the specimen holder shall be held together by screws or clamps to prevent the specimen warping.
Flame height gauge	Completed designed according ISO11925-2 figure 8
Burner positioner	Completed designed according ISO11925-2 figure 9, edge flame impingement1, surface flame impingement1
ignition	High pressure automatic ignition, durable combustion
Test flame height	20±1mm (the flame height is adjusted by flowmeter, and measured by flame height gauge)
Flame application time	0-999.9s (presettable)
Test time	0-999.9s (presettable)
Anemometer	hot wire, with an accuracy of ±0.1m/s, for measuring the airflow velocity in the upper outlet of the combustion chamber
Input power supply	AC 220V/50Hz
Working condition	15℃~35℃ (ambient temperature), ≤85% (R.H.)

Product Tags:

ISO11925-2 Building Material Flammability Tester PLC Control Stainless Steel Combustion Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Pego Electronics (Yi Chun) Company Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

ISO11925-2 Building Material Flammability Tester PLC Control Stainless Steel Combustion

ISO11925-2 Building Material Flammability Tester PLC Control Stainless Steel Combustion

Building Material Flammability Tester

PLC Control Flammability Tester

Building Material flame tester

ISO11925-2 Building Material Flammability Tester PLC Control Stainless Steel Combustion Images